Mid-range - 120V / 60Hz
Twice the stored energy of the Base, plus a Level 1 EV charging outlet for light fleet duty.
Specification
| Total energy | 30 kWh LFP |
|---|---|
| Capacity | 600Ah |
| Nominal voltage | 51.2V |
| Output voltage | 120VAC @ 60Hz |
| Continuous output (25°C) | 2,400 W |
| Continuous output (40°C) | 2,200 W |
| Peak power | 5,500 W |
| Max efficiency | 95% |
| Zero load power | 11W / 7W / 2W |
| Transfer switch | 50 A |
| Max AC input current | 50 A |
| Power outlets | 2x NEMA 5-15R, 15A, 125V |
| Charging receptacle | NEMA 5-15, 15A, 125V |
| Generator receptacle | NEMA 5-30, 30A, 125V, 3750 W |
| EV charger | Level 1, 15 ft (L6A) |
Who it is for
Every PulseTrek trailer shares the same platform: LFP chemistry at 51.2V nominal, 6,000+ charge cycles, a 20% state-of-charge cutoff, a NEMA 3R powder-coated steel enclosure rated NEMA 3R, a 3,500 lbs GVWR trailer, touchscreen HMI and remote monitoring.
| Chemistry | LFP (lithium iron phosphate) |
|---|---|
| Nominal voltage | 51.2V |
| Cycle life | 6,000+ |
| SOC cutoff | 20% |
| Enclosure | NEMA 3R powder-coated steel |
| Trailer GVWR | 3,500 lbs |
| Bed height | 18-20 in |
| Road clearance | 7-10 in |
| Operating range | -20°C to +50°C |
| Monitoring | Touchscreen HMI and remote monitoring |
| Options | Solar upgrade kit, stadium lighting kit, security camera kit |
Questions answered
It depends on the load. With 30 kWh LFP of stored energy and a 20% state-of-charge cutoff, a site drawing 1 kW runs for well over a day, while a site pulling the full 2,400 W draws the pack down in a few hours. Send us your load list and we will give you a runtime figure.
Yes. The generator receptacle lets an existing genset recharge the pack, after which the generator drops to standby and the battery carries the load again. That is how a hybrid setup cuts generator runtime rather than removing the generator entirely.
Near zero. There is no oil, no filters and no fuel system. LFP cells are rated for 6,000+ cycles and the system includes remote monitoring so problems are seen before they become site downtime.
Get in touch
Tell us the site, the load and the runtime you need. Our Austin engineering team comes back with a configuration, a runtime estimate and a price.
+1 512-316-7347
info@pulsar.industries
WhatsApp +1 512-585-8293
