Designed and assembled in Texas, USA · Financing from $700/month → +1 512-316-7347 WhatsApp +1 512-585-8293 info@pulsar.industries
Request a quote
Home › Service areas › California › San Francisco Bay Area

San Francisco Bay Area, California

Battery generator rental and sales in San Francisco Bay Area, CA

Commercial-grade battery energy storage for the Bay Area, designed and assembled in Texas. Buy, rent, lease or finance.

Request a quoteRental options
Construction powerFilm and TVEvent powerData centre projectsFinancing from $700/month

Local service

Battery power for the Bay Area, without the generator

Tight urban sites, strict noise rules and ambitious climate targets make the Bay Area one of the most natural markets for battery power in place of diesel.

For the Bay Area crews, a PulseTrek does the generator's job from stored energy. The trailers hold 15 kWh or 30 kWh of lithium iron phosphate storage, deliver up to 8,000 W continuous and 20,000 W peak on the Performance model, and recharge from shore power, an existing genset or solar.

Units ship by road from our Liberty Hill, Texas facility, roughly 1,850 miles from the Bay Area. Purchase, lease and financing are available across California; rental availability depends on fleet position and project length, and delivery, set-up and remote monitoring are arranged with your quote.

the Bay Area sits in the CAISO grid region. Wildfire weather adds another reason. Utilities in the region now switch lines off pre-emptively when fire risk is high, sometimes for days. A battery rides through those shutoffs without adding an ignition source or a fuel store to a dry site. Summer heat is the other stress. Peak demand climbs, the grid tightens and site equipment runs hot. PulseTrek systems are rated to operate up to +50°C (122°F), and a battery does not lose efficiency running at part load the way a generator does.

What it runs

What the Bay Area sites use a PulseTrek for

Choosing a model

Which PulseTrek suits a the Bay Area job

JobTypical loadSensible starting point
Construction compoundCabins, tools, lighting, securityBase+ 30 kWh, or several units
Film unit base or locationLighting, camera, video villagePerformance 30 kWh
Stage, PA or hospitalityHigh peaks, 8 kW continuousPerformance 30 kWh
Data centre build or commissioningSustained multi-loadContainerised BESS to 8.3 MWh
Financing available from just $700/month

Spread the cost of a PulseTrek system through our financing partner, subject to credit approval. Apply online in a few minutes, or ask us for a quote first.

Check financing optionsGet a quote

Nearby

Service areas near the Bay Area

Local questions

Battery storage in San Francisco Bay Area: questions answered

Can I rent a battery generator in San Francisco Bay Area?

Yes, subject to fleet availability, with purchase, lease and financing from $700/month available across California. Units ship from Liberty Hill, Texas, and project-length rentals are the most practical arrangement at this distance.

Where do PulseTrek units for the Bay Area come from?

Every unit is designed and assembled at our facility in Liberty Hill, Texas, roughly 1,850 road miles from the Bay Area. Delivery timing is confirmed with your quote.

Can a battery run a construction site in San Francisco Bay Area?

Yes. A 30 kWh PulseTrek runs a typical construction compound for roughly 4 to 8 hours of working load, and much longer on light overnight loads such as security and welfare units. Longer programmes use several units or a containerised system.

Can a battery keep a San Francisco Bay Area site running through a precautionary power shutoff?

Yes. A PulseTrek can carry critical loads through a shutoff and recharge from solar with the upgrade kit, so runtime is open-ended wherever daily use sits within the array's output. There is no fuel store and no exhaust, which matters on a site in fire weather.

Is financing available for a PulseTrek in San Francisco Bay Area?

Yes. Financing is available from $700/month through our financing partner, subject to credit approval. You can check your options online in a few minutes or ask us for a quote first.

Keep reading

Related pages

Get in touch

Request a quote for the Bay Area

Tell us the site, the load and the runtime you need. Our Austin engineering team comes back with a configuration, a runtime estimate and a price.

  • Sizing and runtime estimate for your actual load
  • 120V/60Hz and 230V/50Hz configurations
  • Rental, purchase, lease and OEM enquiries all welcome
  • Buy American Act documentation available on request
  • Financing available from just $700/month

+1 512-316-7347
info@pulsar.industries
WhatsApp +1 512-585-8293

Send an enquiry

We reply within one business day. Your details are never sold or shared.

WhatsApp us