Leberi containerised BESS
The densest Leberi: 5 MWh in a 20 ft container, using 314 Ah cells to fit more energy into the same footprint as the 3.3 MWh model.
Specification
| Energy | 5.0 MWh |
|---|---|
| Configuration | 12P416S |
| Cell capacity | 314 Ah |
| Container | 20 ft |
| Nominal voltage | 1,331.2 V DC |
| Charge and discharge rate | 0.5C |
| Cooling | Intelligent liquid cooling |
| Fire protection | Aerosol suppression |
| Protection rating | IP54 |
| Operating temperature | 0°C to 55°C |
| Communications | RS485, CAN, Ethernet |
| Chemistry | LFP |
At 0.5C, the SE-1331V-5M delivers roughly 2.5 MW for about two hours. Its 314 Ah cells fit 5 MWh into a 20 ft container, which gives the most energy per square foot in the range.
It suits sites that need more than 3.3 MWh but cannot take a 40 ft container: urban industrial plots, EV charging depots and data centre yards.
Questions answered
A 5.0 MWh containerised LFP battery energy storage system in a 20 ft container, configured 12P416S with 314 Ah cells, liquid cooling and aerosol fire suppression.
Demand charge reduction, EV charging hubs, solar-plus-storage, data centre support and utility capacity, sized from your interval data.
It holds about 50 percent more energy in the same 20 ft footprint.
Keep reading
Get in touch
Tell us the site, the load and the runtime you need. Our Austin engineering team comes back with a configuration, a runtime estimate and a price.
+1 512-316-7347
info@pulsar.industries
WhatsApp +1 512-585-8293
