Designed and assembled in Texas, USA · Financing from $700/month → +1 512-316-7347 WhatsApp +1 512-585-8293 info@pulsar.industries
Request a quote
Home › Service areas › New York › New York City

New York City, New York

Mobile battery power in New York City, NY, with no diesel and no noise

Commercial-grade battery energy storage for New York City, designed and assembled in Texas. Buy, rent, lease or finance.

Request a quoteRental options
Construction powerFilm and TVEvent powerFinancing from $700/month

Local service

Battery power for New York City, without the generator

New York City is the tightest noise and emissions environment in the country for temporary power, with constant construction, film shoots on public streets and events in dense neighbourhoods.

For New York City crews, a PulseTrek does the generator's job from stored energy. The trailers hold 15 kWh or 30 kWh of lithium iron phosphate storage, deliver up to 8,000 W continuous and 20,000 W peak on the Performance model, and recharge from shore power, an existing genset or solar.

Units ship by road from our Liberty Hill, Texas facility, roughly 1,900 miles from New York City. Purchase, lease and financing are available across New York; rental availability depends on fleet position and project length, and delivery, set-up and remote monitoring are arranged with your quote.

New York City sits in the NYISO grid region. Winter matters too. Ice and snow take down distribution lines, and a generator left idle in the cold is the one that will not start. PulseTrek systems are rated to operate from -20°C to +50°C (-4°F to 122°F), inside a NEMA 3R steel enclosure. Hurricane season is the bigger test. When a storm closes roads and fuel depots, generator backup fails at its supply chain, not its engine. A charged battery has nothing left to deliver, and PulseTrek systems kept medical facilities running through Hurricane Harvey.

What it runs

What New York City sites use a PulseTrek for

Choosing a model

Which PulseTrek suits a New York City job

JobTypical loadSensible starting point
Construction compoundCabins, tools, lighting, securityBase+ 30 kWh, or several units
Film unit base or locationLighting, camera, video villagePerformance 30 kWh
Stage, PA or hospitalityHigh peaks, 8 kW continuousPerformance 30 kWh
Financing available from just $700/month

Spread the cost of a PulseTrek system through our financing partner, subject to credit approval. Apply online in a few minutes, or ask us for a quote first.

Check financing optionsGet a quote

Nearby

Service areas near New York City

Local questions

Battery storage in New York City: questions answered

Can I rent a battery generator in New York City?

Yes, subject to fleet availability, with purchase, lease and financing from $700/month available across New York. Units ship from Liberty Hill, Texas, and project-length rentals are the most practical arrangement at this distance.

Where do PulseTrek units for New York City come from?

Every unit is designed and assembled at our facility in Liberty Hill, Texas, roughly 1,900 road miles from New York City. Delivery timing is confirmed with your quote.

Can a battery run a construction site in New York City?

Yes. A 30 kWh PulseTrek runs a typical construction compound for roughly 4 to 8 hours of working load, and much longer on light overnight loads such as security and welfare units. Longer programmes use several units or a containerised system.

Does a PulseTrek work through a New York City winter?

PulseTrek systems are rated to operate between -20°C and +50°C (-4°F to 122°F) and sit in a NEMA 3R powder-coated steel enclosure. For deployments that stay below freezing for long periods, tell us the site conditions and we will advise on placement and charging so the pack stays within its limits.

Is financing available for a PulseTrek in New York City?

Yes. Financing is available from $700/month through our financing partner, subject to credit approval. You can check your options online in a few minutes or ask us for a quote first.

Keep reading

Related pages

Get in touch

Request a quote for New York City

Tell us the site, the load and the runtime you need. Our Austin engineering team comes back with a configuration, a runtime estimate and a price.

  • Sizing and runtime estimate for your actual load
  • 120V/60Hz and 230V/50Hz configurations
  • Rental, purchase, lease and OEM enquiries all welcome
  • Buy American Act documentation available on request
  • Financing available from just $700/month

+1 512-316-7347
info@pulsar.industries
WhatsApp +1 512-585-8293

Send an enquiry

We reply within one business day. Your details are never sold or shared.

WhatsApp us